Home > Product Support > Software Dowloads > Exponent Updates


Subscribe to User News

NOTES:

Exponent is for the XTPlus and HDPlus only.

You will need to enter your original Exponent CD number to install this software. Exponent Lite CD numbers are not compatible so you will need to contact your local sales representative to purchase an upgrade.

The latest version depends upon your operating system. See below for details:

The latest firmware is supplied with the Exponent update and can be downloaded to the XTplus  / HDplus using the 'XTPlus Initialiser' software supplied with the update.

View the change history

Shows a summary of the changes made between versions.


Version 6

For Windows XP (service pack 3 or higher),
Vista, Windows 7, Windows 8.x and Windows 10.
Both 32 and 64 bit are supported.

Download SetupExponent_6_1_14_0.exe

193 MB

Downloads a setup program that will update ANY previous installation of Exponent. This will NOT update Texture Expert or Exceed.

This version is not compatible with Windows 95, 98, Me, NT4 or 2000.

An error was found in Exponent versions prior to 6.1.12.0 with the flow rate calculation of the Dough Inflation System Type 2 model. The adjustment for the larger piston diameter was not being made so the actual flow rate was higher than displayed in the T.A. Settings window.

For operators of the DR/DIS2 who have created their own projects or made copies of the sample projects, the Dough Inflation System will continue to operate in the same way as before i.e. the displayed value of 26.7 will continue to operate at the actual flow rate of 60.9 cm3/sec for compatibility with existing results.

The new sample projects and library sequences (supplied from version 6.1.12.0 onwards) correct this issue and run at the displayed flow rate i.e. 26.7 cm3/sec. Operators who have been directly using sample projects from previous Exponent versions, and wish to continue using the same flow rate as the previous versions, will need to change the flow rate value to 60.9 cm3/sec.


Version 5

For Windows 2000 (service pack 4)

Download SetupTEE32_5_1_2_0.exe

90.1 MB

Downloads a setup program that will update ANY previous installation of Exponent. This will NOT update Texture Expert or Exceed.

This version is not compatible with Windows 95, 98, Me, NT4.


Version 4

For Windows 98, Me

Download SetupTEE32_4_0_13_0.exe

80.8 MB

This version is not compatible with Windows 95 or NT4.

Windows XP64 and Vista64 are not supported by the USB adapter drivers in this version.


Version 3

For Windows 95 and NT4

Download SetupTEE32_3_0_5_0.exe

Requires Internet Explorer 4.01 SP2 or higher present on the target PC as this provides the Windows database functions.

Notes

Using Exponent 32 on NT

This link will show details of the security issues that can occur when using Exponent on Windows NT based operating systems.

Using Exponent on Vista

This link will show the latest information we have about using this version on Microsoft Vista.

If you have any suggestion for new features, etc then please send them to TE32Requests@stablemicrosystems.com